Today I performed some tests measuring gas production with DC voltage. The tests were performed in order to obtain aproximately the same con...

For one measurement taken without the inductor coil, we have the following values:

I performed two consecutive runs without changing the conditions. The data obtained is as follows: Considering that it consistently took ...

After reparing the WFC and adding extra safety measures, here is the entire setup producing hydrogen at 12 Volts DC and 1.94 Amps. Next I w...

After yesterday's mishap, and of realizing how lucky I was to still be in one piece, it is time to take a deep breath and after looking ...

Sometimes mistakes can be the death of the artist. In this case I got closer to it than desirable: after building a tiny bubbler for testing...

Just as refered by several people doing this type of research, adding and inductive element to the load would create a resonant LC circuit, ...

The container is now air tight. This allowed me to start doing some electrolyser efficiency tests. By attaching a small hose between the con...

While the air leak problem have not yet been solved, other problems are now fixed, and some improvements have been made. The control circui...

The basic electrolyser design is finally finished. After a lot of steel cutting and drilling, I've finally finished the first prototype ...

When it comes the time to pay after filling up the tank, you dearly wish your car could run on anything cheaper than stinky old gasoline (or...