In the previous post I had the chance of discovering and documenting most of what there is to learn about the communication between the LCD unit and the master ESC (speed controller) that drives the e-Scooter rear motor.
In the previous post I had the chance of discovering and documenting most of what there is to learn about the communication between the LCD unit and the master ESC (speed controller) that drives the e-Scooter rear motor.
Most e-Scooters and other Electric Vehicles have some form of Electronic Speed Controller (ESC) which is responsible for delivering a power signal that will spin motors at the desired speed. The most common type of motors today are of the BLDC type (Brushless DC motors), which are typically driven by a 3-phase current.
One thing about these types of electric vehicles is that there is very limited care for normalisation, when it comes to allow different components to interoperate. Especially in respect to the digital communication between the parts of the system, one cannot expect any baseline currently.
The Laotie Ti30 (and other similar chinese scooters) comes with a basic alarm device that is capable of locking the scooter via a remote control. These alarm boxes are usually dirt cheap and can be bought separately for 5 € on Aliexpress or similar seller.
Moving along with the range of improvements that this scooter requires - of which some are practically essential, the parts I needed for doing a few more improvements have conveniently arrived.